|
|
Classic® Frameless - Specifications

| T 102/40 |
40 feet |
49.0 cubic yards |
57" 55" |
8 1/4 - 280 |
| T 102/39 |
39 feet |
48.5 cubic yards |
57" 55" |
8 - 265 |
| T 102/38 |
38 feet |
47.3 cubic yards |
57" 55" |
8 - 265 |
| T 102/37 |
37 feet |
46.0 cubic yards |
57" 55" |
8 - 250 |
| T 102/35 |
35 feet |
43.5 cubic yards |
57" 55" |
8 - 235 |
| T 102/33 |
33 feet |
41.0 cubic yards |
57" 55" |
8 - 220 |
| T 102/32 |
32 feet |
39.7 cubic yards |
57" 55" |
8 - 220 |
| T 102/30 |
30 feet |
37.2 cubic yards |
57" 55" |
8 - 220 |
| T 102/28 |
28 feet |
34.6 cubic yards |
57" 55" |
8 - 190 |
| T 102/26 |
26 feet |
32.1 cubic yards |
57" 55" |
8 - 170 | | * FLOOR SHEET HEIGHT / SPRING AIR RID
| T 102/40 |
45 degrees |
439" (36' 7") |
| T 102/39 |
43 degrees |
427" (35' 7") |
| T 102/38 |
45 degrees |
415" (34' 7") |
| T 102/37 |
43 degrees |
403" (33' 7") |
| T 102/35 |
44 degrees |
397" (31' 7") |
| T 102/33 |
45 degrees |
355" (29' 7") |
| T 102/32 |
46 degrees |
343" (28' 7") |
| T 102/30 |
50 degrees |
319" (26' 7") |
| T 102/28 |
46 degrees |
295" (24' 7") |
| T 102/26 |
46 degrees |
271" (22' 7") | | |
| BODY |
 |
 |
| Tapered : |
From 96" at front to 102" at rear. |
 |
| Gate : |
Full overhead swinging with 12 degree slope, heavy-duty recessed hinges. Replaceable rubber seal. |
 |
| Aluminum Sheet : |
5454 and 5083. - Nose .250 - Hoist box .250 - Tailgate .160 - Side Sheet .160 - Floor .250 |
 |
| Aluminum Extrusions : |
6061 - T6 - 9" top rail - 8" side stakes, automatic machine wielded - 4" U channel crossmembers on 10 inch centers - Extra heavy members in key locations - 10" extruded front post and 9" extruded rear post |
 |
| Tarp Rod : |
Pin striped, length of sides. |
 |
| Side turn signal : |
Mounted on diamond plated bracket. |
 |
| Side marker lights : |
Sealed beam, three per side. |
 |
| SUSPENSION/UNDERBELLY |
 |
 |
| Suspension : |
Single point 50,000 lb capacity, wide track, 3 leaf spring. |
 |
| Axles : |
5" round, 5/8" wall, full 102" wide with interchangeable inner and outer bearings, "Big Spindle". |
 |
| Hubs : |
10 Hole, cast. |
 |
| Brakes : |
16.5x7 air-acuated. Premium lining. Auto slack adjusters. (Brake system complies with FMVSS 121). |
 |
| Drums : |
Outboard. |
 |
| Tires : |
Steel belted radials 11R24.5. |
 |
| Tire Carrier: |
Standard. |
 |
| Paint : |
Black enamel, all steel parts, other colors optional, see our color chart here. COLOR CHART |
 |
| Mud Flaps : |
24" x 40", anti sail. 1/2" rubber. |
 |
| Lift Arms : |
Full width heavy-duty steel, with drop legs. |
 |
| Hydraulic Cylinder : |
Front lift telescopic, 40-ton rated capacity (see above charts) |
 |
| Wiring : |
Water tight plastic conduit. |
 |
| Lights : |
Sealed beam lights. |
 |
| Electrical Receptacle : |
7-way ATA, 12-volt system. |
 | Note: Trailer conforms to applicable "Federal Motor Vehicle Safety Standards." All products, specifications, and features as described or illustrated are subject to change without notice.
|
|